Demo version of AlfaOBD software for Alfa-Romeo, Fiat and Lancia diagnostics. Although it is primarily targeted for car owners, it provides many of the features of professional scanners.
Application help is available onhttp://www.alfaobd.com/AlfaOBD_Android_Help.pdfAlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars.
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- (Full version only) active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- (Full version only) electronic key and RF remote control programming
AlfaOBD supports ELM327 and OBDKey Bluetooth interfaces on all Bluetooth-enabled Android devices and ELM327/OBDKey WLAN interfaces on rooted devices only. For details of configuration of connection to interface and car see application help.
Application available in Czech, English, French, German, Italian, Polish, Portuguese, Russian, and Spanish. Languages are selectable via Setting.
The limitations of the demo version are:
- Application run time limit of 15 minutes. Application reverts back to the first screen after 15 minutes of connection to a control unit.
- No active diagnostic procedures available
- The number of scanned gauges is limited by four
- The number of monitored parameters is limited by four
All other features are operational. No time limit is imposed on the application.
NOTE: Please switch off "Don't keep activities" in "Settings"->"Developer Option" on your Android device. If plots are not updated, turn "Force GPU rendering" off in "Settings"->"Developer Option".알파 로미오, 피아트 란치아 진단 AlfaOBD 소프트웨어의 데모 버전입니다. 그것은 주로 자동차 소유자 대상이지만, 전문 스캐너의 많은 기능을 제공합니다.
응용 프로그램 도움말을http://www.alfaobd.com/AlfaOBD_Android_Help.pdf에서 사용할 수 있습니다
AlfaOBD 기능은 다음과 같습니다 :
- 전자 제어 장치의 네이티브 지원은 피아트 그룹 자동차에 사용됩니다. 기본 지원 피아트 그룹 자동차의 제한된 일반적인 OBDII 지원을 제공하는 많은 다른 진단 응용 프로그램에서 AlfaOBD 다릅니다.
- 엔진의 다양한 동적 매개 변수, 변속기, ABS, 플롯 온도 조절 ECU를 및 그래픽 프레 젠 테이션을 모니터링
- 정적 데이터의 읽기 : ECU 식별, 시스템 상태, 가능한 원인 및 환경 정보를 오류 코드 해당되는 경우
- 오류 코드 삭제
- (풀 버전은 전용) 엔진 제어 활성 진단 및 각종 장비의 구성 절차, 기어 박스, 바디 컴퓨터, 기후 제어, ABS, 에어백, 코드 제어와 다른 ECU를
- (전용 풀 버전) 전자 키와 RF 원격 제어 프로그램
AlfaOBD 모든 Bluetooth 지원 안드로이드 장치 만 뿌리 장치에서 ELM327/OBDKey WLAN 인터페이스에 ELM327 및 OBDKey 블루투스 인터페이스를 지원합니다. 의 연결 구성에 대한 자세한 내용은 인터페이스 및 자동차 응용 프로그램 도움말을 참조하십시오.
체코 어, 영어, 프랑스어, 응용 프로그램, 독일어, 이탈리아어, 폴란드어, 포르투갈어, 러시아어, 스페인어. 언어 설정을 통해 선택할 수 있습니다.
데모 버전의 제한 사항은 다음과 같습니다 :
- 15 분 응용 프로그램 실행 시간 제한. 응용 프로그램 제어 장치에 연결 15 분 후 첫 화면으로 돌아갑니다.
- 활동적인 진단 절차 없음 가능
- 스캔 게이지의 수는 4로 제한됩니다
- 모니터링 매개 변수의 수는 4로 제한됩니다
다른 모든 기능이 작동합니다. 시간 제한은 응용 부과되지 않습니다.
참고 : "설정"의 "활동을 유지하지 마십시오"떨어져 전환하십시오 -> "개발자 옵션을"당신의 안드로이드 장치. > "개발자 옵션"- 플롯이 업데이트되지 않은 경우, "설정"에서 벗어나 "강제 GPU 렌더링"을 설정합니다.